Miller Home Inspection, LLC
  • Home
  • Our Team
  • Your Inspection
  • Commercial Inspections
  • Radon Testing
  • Additional Services
  • Pricing
  • Blog
  • Schedule Today
  • Menu Menu
  • Link to Facebook
  • Link to X
Uncategorized

A Guide to Radon Test Results for Homebuyers

A radon result is not just another line item in an inspection report. It can affect your health, your negotiating position, and the work you may want completed before closing. This guide to radon test results explains what the numbers mean, when to act, and how to keep a result in proper perspective during a real estate transaction.

Radon is a naturally occurring radioactive gas that comes from the breakdown of uranium in soil and rock. It can enter through cracks in foundations, sump pits, crawlspaces, utility openings, and other small pathways. Because it has no color, odor, or taste, testing is the only way to know whether it is present at an elevated level.

How to Read a Radon Test Result

Radon is measured in picocuries per liter of air, written as pCi/L. A report may show one final average result or a series of readings collected over the testing period. For most buyers, the final reported average is the number that matters most.

The U.S. Environmental Protection Agency recommends taking action when radon levels are at or above 4.0 pCi/L. That does not mean a home below 4.0 pCi/L has zero radon. It means 4.0 pCi/L is the level at which mitigation is strongly recommended because the long-term health risk becomes more significant.

A practical way to view common results is:

  • Below 2.0 pCi/L: Generally considered low, though no radon level is completely risk-free.
  • 2.0 to 3.9 pCi/L: Below the EPA action level, but worth considering for mitigation, especially if occupants will spend substantial time in the lowest level of the home.
  • 4.0 pCi/L or higher: Mitigation should be pursued.
  • Very high readings, such as 10.0 pCi/L or more: Call for prompt attention and a clear plan before or soon after occupancy.

A result is not a pass-or-fail grade for the house. It is a measurement of conditions during a specific testing window. Still, a properly conducted real estate radon test gives buyers and sellers meaningful information for making a sound decision.

Why results can vary

Radon levels naturally change. Weather, soil moisture, barometric pressure, HVAC operation, foundation conditions, and how a home is ventilated can all influence the reading. A home may test differently in winter than it does in summer, or even from one week to the next.

That variability is why a single result should be interpreted carefully, not dismissed. A short-term test that reaches or exceeds 4.0 pCi/L is a reasonable basis for requesting mitigation. Retesting may be appropriate in some situations, but waiting for a lower number is not a substitute for addressing a consistently elevated result.

Was the Test Performed Under the Right Conditions?

Before focusing only on the number, review whether the test was completed correctly. A reliable test depends on both the device and the conditions in the home.

Most real estate tests are short-term tests, typically lasting at least 48 hours. During that time, closed-house conditions are generally required. Exterior doors and windows should remain closed except for normal entry and exit. Heating and cooling systems can operate normally, but whole-house fans, window fans, and other equipment that brings substantial outdoor air inside should not be used.

The testing device should be placed in the lowest level that could be regularly occupied, such as a basement, finished lower level, or first floor. It should not be placed in a kitchen, bathroom, laundry room, crawlspace, or directly near drafts, heat sources, or exterior openings. These details matter because poor placement can distort a result.

A quality report should identify the test dates, duration, device information, measurement location, final result, and any conditions that could affect validity. If the report indicates a disturbance, power interruption, or failure to maintain closed-house conditions, ask whether the test should be repeated.

What to Do When Results Are 4.0 pCi/L or Higher

An elevated result is common enough that it should not automatically end a purchase. Radon mitigation is a well-established improvement, and many systems can reduce levels substantially. The right next step depends on the home, the contract timeline, and the expectations of everyone involved.

In many transactions, the buyer requests that the seller have a qualified radon mitigation professional install a system before closing. Another option is a credit or price adjustment that allows the buyer to arrange the work after closing. Seller-installed systems often provide more certainty, while a credit may give the buyer more control over the contractor and schedule.

The best path depends on the property and the transaction. If the home has a high result, a finished basement, or occupants who will use the lower level frequently, completing mitigation before closing may offer greater peace of mind. If timing is tight, a credit can be reasonable, provided the amount reflects a realistic local estimate and the buyer understands the work that remains.

Do not assume that simply opening basement windows or running a fan is a lasting solution. A proper mitigation system typically uses a fan and piping to draw radon gas from beneath the foundation and discharge it safely above the home. The design may differ for a slab foundation, basement, crawlspace, or combination of foundation types.

Ask for post-mitigation testing

A mitigation system should be verified with a follow-up radon test after installation. The system is not complete just because the fan is running. Post-mitigation testing confirms whether it brought the level down to an acceptable range.

For sellers, documentation of the installation and follow-up result can help demonstrate that the issue was addressed responsibly. For buyers, it provides a useful baseline for future testing. Radon systems also need occasional attention, including checking the warning device or manometer and replacing the fan when it eventually reaches the end of its service life.

When a Result Is Below 4.0 pCi/L

A result below the EPA action level usually does not require a repair request. However, it should not be treated as a permanent guarantee. If a home tests at 3.7 pCi/L, for example, the reading is below the action level but close enough that some buyers may choose to monitor it or consider mitigation later.

Your decision may also depend on how the home will be used. A family planning to finish a basement as bedrooms or a playroom may take a near-action-level result more seriously than a buyer who will use the basement only for storage. Health considerations, including smoking in the household, can also affect how cautious a family wants to be.

Retesting is a sensible part of long-term homeownership. Consider testing again after major renovations, foundation work, HVAC changes, or changes to how the lowest level is used. Even without those changes, periodic retesting helps account for natural variation over time.

Radon Results and Southern Illinois Real Estate

Radon can be found in any home, regardless of age, construction style, or neighborhood. New homes can have elevated levels, and a house with no visible foundation concerns can still test high. The fact that a neighboring home tested low does not predict the result in the home you are buying.

That is especially relevant in Southern Illinois, where soil conditions and home construction vary widely from one property to the next. A radon test is property-specific due diligence. It is not an accusation that the seller failed to maintain the home, nor is it a reason to panic when a result comes back elevated.

For remote buyers, clear documentation matters even more. A readable report, testing details, and a direct explanation of next steps make it easier to make decisions without being physically present. Miller Home Inspection approaches radon findings the same way it approaches the rest of an inspection report: with clear facts, practical context, and no pressure to overreact or overlook a concern.

Keep the Result in Perspective

Radon testing gives you information before a major decision, which is exactly when information is most valuable. An elevated reading deserves action, but it is usually a manageable issue with a known solution. A low reading is reassuring, but it is still wise to test again over the life of the home.

The goal is not to find a perfect property. It is to understand the property you are buying, address material risks intelligently, and move toward closing with fewer unanswered questions.

October 9, 2026/0 Comments/by
Share this entry
  • Share on Facebook
  • Share on X
  • Share on WhatsApp
  • Share on Pinterest
  • Share on LinkedIn
  • Share on Tumblr
  • Share on Vk
  • Share on Reddit
  • Share by Mail
https://dqybj0sgltn1w.cloudfront.net/wp-content/uploads/sites/181/2021/04/16212115/logo.png 0 0 https://dqybj0sgltn1w.cloudfront.net/wp-content/uploads/sites/181/2021/04/16212115/logo.png 2026-10-09 01:53:052026-10-09 01:53:05A Guide to Radon Test Results for Homebuyers
0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Pages

  • Additional Services
  • Blog
  • Commercial Inspections
  • Contact
  • Our Team
  • Pricing
  • Privacy Policy
  • Radon Testing
  • Welcome
  • Your Inspection
  • Your Report

Categories

  • Buyer Home Inspection
  • Foundation Cracks
  • Home Inspection
  • Home Inspection Report
  • Inspection Issues
  • Radon Testing
  • Repair Estimate
  • Termite Inspection
  • Uncategorized

Archive

  • November 2026
  • October 2026
  • September 2026
  • August 2026
  • July 2026
  • June 2026
  • May 2026
  • April 2026
  • March 2026
  • February 2026
  • January 2026
Email Us Email Us

Email Us

office@millerhi.com

Call or Text Call or Text

Call or Text

(618) 303-9109

Clock Clock

Hours

8:00am-5:00pm
Monday-Friday

Schedule Online

Proudly Serving

  • Carterville
  • Carbondale
  • Herrin
  • Marion
  • Goreville
  • Williamson County
  • Jackson County
  • Union County
  • Johnson County
  • Pope County
  • Franklin County
  • Saline County

Reach Out Today

@ Copyright 2026 Miller Home Inspection - Website by Spectora - Privacy Policy
  • Link to Facebook
  • Link to X
Link to: Foundation Inspection: What Buyers Need to Know Link to: Foundation Inspection: What Buyers Need to Know Foundation Inspection: What Buyers Need to Know Link to: Why Do Houses Fail Inspections? Common Causes Link to: Why Do Houses Fail Inspections? Common Causes Why Do Houses Fail Inspections? Common Causes
Scroll to top Scroll to top Scroll to top